EIB/KNX PE

Изображение кабеля EIB/KNX PE Faber Кabel

Bus cable EIB/KNX PE

Использование

Due to the increased test voltage and the special marking the cable is designed as bus cable in the EIB/KNX facility control system according to EN 50090. For the Instabus itself is used only the red/black pair (transmission of 24 V supply voltage plus data packages), the second pair (white/yellow) is redundant.The cable may be installed on or under plaster, in ducts and buried in the ground.

Конструкция

Customs Tariff Number (code number) 85444991000000000
Conductor material copper, bare
Conductor construction Class 1 = solid
Insulation polyethylene
Stranding unit Pair
Stranding Layers
Screen plastic coated aluminium foil + solid copper drain wire
Sheathing material polyethylene
Colour of outer sheath black
UV-resistant yes
Permitted outer cable temperature, fixed, °C -30 - +70 °C
Permitted outer cable temperature, moved, °C -5 - +50 °C
Bending radius, fixed installation 7.5 x Ø
Insulation resistance 100 MOhmxkm
Number of cores 4
Loop resistance 73.2 Ohm/km
outer diameter approx. 8.00 mm
Copper weight (GER) 21
metal base Cu 100 EUR/100 kg
net weight per 1000 75 kg
Unit of measurement metre

Стандарты

Due to the increased test voltage and the special marking the cable is designed as bus cable in the EIB/KNX facility control system according to EN 50090. For the Instabus itself is used only the red/black pair (transmission of 24 V supply voltage plus data packages), the second pair (white/yellow) is redundant.The cable may be installed on or under plaster, in ducts and buried in the ground.
Артикул Типоразмер кабеля
101639 FaberВ® EIB-bus cable burial 2X2X0.8 BK
Логотип компании FABER Kabel